Genertech’s workshop offers high voltage motor rewinds and high voltage testing. Genertech’s team are committed and devoted to provide the highest quality work.

 

The windings are manufactured using B-stage coils eliminating the possibility of any voids being contained within the coil insulation. High voltage motors are wound with coils that fit snugly into the core slots with minimum clearance between the core and the coils to prevent partial discharge. Coils are isolated from one another and insulated to the level required to ensure suitability to the voltage required.

 

The winding is meticulously wedged,  insulated, secured, blocked, tied, and isolated. An outer layer of conductive tape on the straight sections of the coils is essential. All coil measurements and fits are documented. Electrical tests are performed according to IEEE and EASA standards taking into account your specific needs.